VENTILATION DEVICES DF084-VENTILATION DEVICES-PRODUCTS

Current Location：

Home>Products>VENTILATION DEVICES>VENTILATION DEVICES DF084

PROTECTION

In practice, the climate conditions for electrical and electronic components are not always ideal. To minimise the resulting risks and to optimise the operating conditions in equipment DBOKE provides a wide range of temperature and humidity control systems making sure that electrical and electronic parts are protected from humidity, heat or cold. Complementary DBOKE offers suitable lamps and accessories.

VENTILATION DEVICES DF084

DF084 ventilation pressure reducing valves for mounting the electronic components precise critical electric enclosure to provide environmental protection. Tightly sealed in the control cabinet, larger temperature changes (day and night operation) pressure will occur when this happens, DF084 relief valve vent control cabinet significantly increases the risk of inhalation of dust and humidity. It can be easily installed in any enclosure. Pressure reducing valves for ventilation DINEN62208 meet standard switchgear cabinet.

Technical Parameters:

Installation: PG29 threaded, screw-cap

Material: plastic, to meet Underwriters Laboratories Standard UL94 V-0

Seals: sealing pad (NBR)

Air flow: 7cm²

Dimensions:Φ65.5 * 30.5㎜

Mounting position: vertical

Operating/Storage temperature: -45 ~ 70 ℃ (-49 ~ 158 ℉)

installation:

Diameter opening side of the cabinet + 1mm holes 37, and pressure relief valve and vent nut installation, must ensure the sealing pad mounted outside the control board cabinet. In order to optimize the pressure compensation, it is recommended to use two installation engineers designer vent relief valve in two opposite sides or top of the cabinet.

Art. No.	Protection type	unit	weight
08400.0-04	IP55	2pieces	62g